Equipment

  • 1 Haas VF-4 20x50x25 Vertical Machining Center

  • 2 Haas VF-2 16x30x20 Vertical Machining Centers
  • 1 Hurco CNC Vertical Milling Machine
  • 2 Bridgeport Milling Machines
  • 3 Fanuc Wire EDM Machines 14x20x12
  • 1 Hitachi Wire EDM Machine
  • 1 Hole Popper Small Hole EDM Drill
  • 1 Haas SL10 Turning Center
  • 1 Clausing Colchester Lathe 15x48
  • 1 Hardinge 10x20 Tool Room Lathe
  • 1 Okamota Hydraulic Surface Grinder 16x32 w/Incremental Down Feed
  • 1 Kent Hydraulic Surface Grinder 8x20 w/Incremental Down Feed
  • 1 Heald 18” Rotary Surface Grinder w/Auto Down Feed
  • 1 Thompson 6x18 Surface Grinder
  • 1 Chevalier 6x18 Surface Grinder
  • 4’ Radial Arm Drill Press
  • Servo Precision Sensitive Drill Press
  • Sunnen Hone Machine
  • Glass Bead Machine
  • Cress Heat Treat & Draw Ovens
  • DoAll Vertical Band Saw w/Hydraulic Table
  • Wells Horizontal Band Saw
  • Brown & Sharp CMM 18x20x16
  • Gage Master Optical Comparator w/Auto Edge Detection
  • Height Master
  • Mitutoyo Computerized Height Gage
  • Surface Plates up to 48x62
  • Rockwell Hardness Tester
  • Gages & Numerous other Inspection Equipment
  • Try-out Presses up to 60 Tons
  • Miller Mig Welder
  • Miller Tig Welder
  • 16 ga Metal Shear
  • 16 ga Metal Brake


All quality control instruments are calibrated at specified intervals against standards with traceability to the National Institute of Standards and Technology

|     Home      |     About Us      |     Wire EDM      |     Design      |     Contact Us      |